-
COMPANY
-
-
-
-
What is the cause of silo clogging
Release time:
2024-10-18
Power plants, steel, concrete, coking plants, laminated glass and other manufacturing industries silo due to the raw materials and silo wall bonding, layer by layer accumulation caused by blockage, often resulting in silo clogging. So, what are the solutions for silo clogging? Tell you a good solution, is installed in the silo wall silo anti-wear liner, it is the choice of relative molecular mass of polyethylene resin made of plate, relative molecular mass of polyethylene resin itself has a very good resistance to abrasion, impact resistance, self-wetting, corrosion resistance, non-stick properties, etc., with which the plate is also made of the same characteristics, so, the silo in the silo wall installation of silo anti-friction lining plate So, installing silo anti-friction liner in the inner wall of the silo can be a good solution to the problem of silo clogging. People can not help but suspect that the installation of silo anti-wear liner in the silo wall to deal with the problem of clogging the silo, is after many investigations and tests! Practical effect is particularly good!
Moreover, the installation of warehouse anti-wear liner in the inner wall of the silo, generally do not need to fill the full warehouse, as long as the lower side of the conical section of the silo discharge portion of the silo and a part of its upper round warehouse and a part of its upper round warehouse paved with the warehouse anti-wear liner. The method of installing the warehouse anti-wear liner is relatively simple. When installing warehouse anti-wear liner, in the actual operation or working temperature changes greatly, to consider the liner fixing method, in order to expand or fold at will. And the screw heads are always buried in the liner. Attention should be paid when installing warehouse antiwear liner.
1. In the whole installation process, the liner's foot bolt countersunk head plan should be smaller than the surface;.
2. When installing warehouse liner, the number of anchor bolts per square meter should not be less than 10.
3. The center gap of each liner should not be more than 12.5px (the installation should be properly adjusted according to the working temperature of the plate).
Related News
Mobile:
Tel:
Address: No.88, Han Road, Wugang Town, Tongzhou District, Nantong City, Jiangsu Province, China.
Tel: 0086-513-68016608
E-mail: xg-shen@hljxsb.cn
Mobile phone: 0086-18260516661
HUATAO GROUP
Online message
Copyright © 2024 Honglei Machinery Equipment (Nantong) Co., Ltd.